Hi-Tech Pro-Flow water flow system for flat lap machines

The HiTech Pro-Flow water cooling system offers innovative ways to increase the water reservoir capacity while you’re working on the All-U-Need flat lap machine.

The Pro-Flow attachment conveniently clips onto any new/existing All-U-Need machine and can also be fitted to other types of flat lap or similar lapidary machines.

It can work with a pressure tank or submersible water pump. If you’re looking for an efficient water cooling system, then the Pro-Flow is for you.

The Pro-Flow water cooling system is used on Hi-Tech Diamond All-U-Need machines to increase the water reservoir capacity, providing you hours of drips without having to refill. The Pro-Flow attachment can be used with either a garden pressure tank (available at most good hardware shops) or a submersible water pump. The pressure tank provides hours of drips with the occasional priming, while the submersible water pump lasts even longer in a five-gallon bucket. Also included, is a long drain tube to replace the short drain tube originally included with the All-U-Need. Place this tube in a five-gallon bucket (not included) to reduce the time spent emptying your dirty water.

Dimensions: Pro-Flow attachment tube’s outer diameter measures 1/4″ X 5′ long; drain tube’s outer diameter measures 5/8″ X 4-1/2′ long.